The metal surface needs adhesion in order for the paint to stick. Preparation is key and will include removing all loose particles and paint on the metal surface. Afterwards, your metal surface needs to be washed down with water and left to dry thoroughly.
Check whether the surface is rusted. If so, apply Paint Master Rust Converter to the rusted area. Sand down the rusted area, wash down with water and ensure that the surface is rust free.
Also ensure that the surface is free of dust and dirt.
Now prime the clean metal with Paint Master Water Based Metal Primer, one coat is sufficient. If you stay at the coast, it is best to apply 2 coats of Metal Primer. The spreading rate is approximately 7 m2 per litre. The Primer will take 24 hours to hard dry.
Apply 2 coats of Paint Master Roof Master. Wait for each coat to dry properly. Roof Master will touch dry in approximately 1 hour and hard dry in approximately 4 to 6 hours. The spreading rate is between 6 and 8 m2 per litre. You can use a roof renovator brush to paint the Roof Master.
Firstly you need to clean the ceiling you want to paint. Use a cloth or duster to remove any dust or dirt that may be on the surface, as the dust will mix with your paint and create an uneven surface. Check whether the ceiling has mould. Mould needs to
Lap marks appear as a difference in colour when wet and dry layers of paint overlap while painting. To avoid this from happening, maintain a wet edge while painting as a wet painted area remains workable enough to blend. For example, you are starting to paint a section of a
The following could be the reason: Incorrect roller used for the specific surface. When purchasing a paint brush or roller, read the directions on the label as this will direct you as to which area should be painted with that specific roller. Certain rollers such as foam rollers roll a